• Product
    Your position: Home>Product > BZJ160A three-wheel walker hydraulic piling frame

        BZJ160A hydraulic piling walking frame,Wenling Yu Heavy Industries Co., Ltd. is a development and production of a new generation of ground reinforcement construction equipment, technical performance leader in the domestic level, it has a configuration, superior performance, stable, use of wide, safe, reliable, low-carbon environmental protection. Adapt to a variety of pile construction requirements, especially good deep foundation construction, diaphragm wall construction is widely used (ie SMW method). Can be widely used viaducts, highways, bridges, ports, terminals, subway stations and the construction of deep foundation pit top, rivers dam seepage reinforcement and soft soil improvement reinforcement construction.

     Project  Unit  Parameters
     The total length of the column  (m)  21~39
     Simplified diameter column  (mm)  Φ920
     Column rail center distance  (mm)  600*Φ101.6
     Column angle adjustment range (lateral direction)  (°)  ±1.5
     Bracing cylinder stroke  (mm)  2800
     Column trimming cylinder stroke  (mm)  400
     Maximum drilling machine Model  ZLD100-3
     The largest model diesel hammer  D160
     The maximum length of the column  (m)  39
     Maximum column length maximum tensile force batsu


     Platform rotation angle  (°)  ±10
     Pile frame lateral movement  Speed  (m/min)


     Step  (mm)  3100
     Pile frame longitudinal movement  Speed  (m/min)  <2.7
     Step  (mm)  800
     Pile frame jacking  Speed  (m/min)  <0.55
     Height  (mm)  450~450
     Hydraulic winch (hanging drill
       Hole machine, diesel cone)
     Single line pull  (kN)  91.5max
     Rope speed  (m/min)  0~26
     Rope diameter  (m)  Φ21.5
     Rope capacity  (m)  550
     Hydraulic winch (start off,
       Drill pipe hanging, hanging pile)
     Single line pull  (kN)  68max
     Rope speed  (m/min)  0~32
     Rope diameter  (m)  Φ20
     Rope capacity  (m)  265
     Gauge track shoe  Work  (mm)  9100
     Move  (mm)  4800
     Tread  Work  (mm)  4800
     Move  (mm)  5000
     Lateral track shoe  Length  (mm)  9500
     Width  (mm)  1200
     Longitudinal track shoe  Length  (mm)  6900
     Width  (mm)  2200
     Outrigger beams and platform connection mode  Rotary pin, cylinder extended stretch
     Ground pressure  (Mpa)  ≤0.1
     Motor Power  (kw)  45
     Hydraulic system pressure  (Mpa)  25/20
     Ways to manipulate the hydraulic system  Manual and electrical control
     The total weight of the hammers  (t)  ≈130


    Copyright ? 2015 Dongyu Heavy industry
    Web Design & Optimize: www.zowee.cn